UHMWPE Sheet & Rod

Trade Names: Polystone, Simona, Rochling

UHMWPE is Ultra High Molecular Weight Poly Ethylene.

UHMWPE is a very rigid material for use in general plant engineering where the unique properties, excellent impact strength, wear and abrasion resistance are required.

Click here to view material properties.

• Excellent impact resistance
• High mechanical strength
• Resistant to many solvents
• Very good electrical insulator
• Excellent abrasion resistance
• Very high damping properties
• Continuous use temp. of -269 to 80 Deg. Cent.
• Minimum water absorption (0.01%)
• Extremely low co-efficient of friction
• F.D.A. approved for food and drug industries

• UHMWPE is resistant to Acids, Salts & salt solutions, Alcohols, oils, fats, waxes & many solvents.
• All PE material is affected by strong oxidizing agents such as nitric acid, chromic acid or halogens.
• Aromatics and Halogenated hydrocarbons cause swelling.

• Sheet & Rod products of UHMWPE are supplied in two colours.
• White which is non-UV.
• Black which is UV.

• Flow promoting liners to resist sliding abrasion and to assist release, conveyor components subject to high wear and requiring low friction.
• Componentry in direct contact with food stuffs.
• Parts subject to high impact stresses.

• White & Black

• White & Black: 3, 5, 6, 7, 10, 12, 15, 20, 25, 30, 35, 40, 50mm

• Sheet sizes available are 2000 x 1000mm

We offer a cut to size service for UHMWPE sheet and rod: click here to request a quote via our plastic fabrication/cut to size enquiry form.

• 10 to 45mm O.Dia. must be purchased in full length only
• 50mm diameter and over MINIMUM cut to size is 500mm