U.H.M.W.P.E. Sheet & Rod

Trade Names: Polystone

U.H.M.W.P.E. is Ultra High Molecular Weight Poly Ethylene.

UHMWPE is a very rigid material for use in general plant engineering where the unique properties, excellent impact strength, wear and abrasion resistance are required.

Click here to view material properties.

Typical Properties

  • Excellent impact resistance
  • High mechanical strength
  • Resistant to many solvents
  • Very good electrical insulator
  • Excellent abrasion resistance
  • Very high damping properties
  • Continuous use temp. of -269 to 80 Deg. Cent.
  • Minimum water absorption (0.01%)
  • Extremely low co-efficient of friction
  • F.D.A. approved for food and drug industries

Chemical Resistance

  • UHMWPE is resistant to Acids, Salts & salt solutions, Alcohols, oils, fats, waxes & many solvents.
  • All PE material is affected by strong oxidizing agents such as nitric acid, chromic acid or halogens.
  • Aromatics and Halogenated hydrocarbons cause swelling.

U.V. Resistance

  • Sheet & Rod products of UHMWPE are supplied in two colours.
  • White which is non-UV.
  • Black which is UV.

Applications

  • Flow promoting liners to resist sliding abrasion and to assist release, conveyor components subject to high wear and requiring low friction.
  • Componentry in direct contact with food stuffs.
  • Parts subject to high impact stresses.

Colour Range

  • White & Black

UHMWPE Sheet Thickness

  • White & Black: 3, 5, 6, 7, 10, 12, 15, 20, 25, 30, 35, 40, 50mm

Sheet Size

  • Sheet sizes available are 2000 x 1000mm

UHMWPE Rod

  • Available rod diameter is White & Black
  • 2m lengths: 10, 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90, 100mm
  • 0.5m lengths: 110, 120, 125, 130, 140, 150mm

Cut to Size Sheet and Rod

We offer a cut to size service for UHMWPE sheet and rod: click here to request a quote via our plastic fabrication/cut to size enquiry form.

  • 10 to 45mm O.Dia. must be purchased in full length only
  • 50mm diameter and over MINIMUM cut to size is 500mm

Get a quote for our cut to size service! WITH P&M Plastics